Listen Technology|Fiber Optic Solutions|Network Systems


    Home > Products > Network Systems > Network Cable

      Cat6 Networking Cable UTP

      Cat6 Networking Cable UTP

      1. Detailed information

      Cat6 Networking Cable UTP


      Electrical performance (at 100MHz):

      1.0 to 100.0MHz impedance: 100 ±15Ω

      1.0 to 250.0MHz impedance: 100 ±22Ω

      Impedance delay screw:<45ns/100M

      Pair to ground capacitance unbalance: 330pF/100m maximum

      Conductor DC resistance: 20%,<73.2Ω/km

      Resistance unbalance: 5%

      Test object: jacket

      Test material: PVC

      305 meters, packaged in full boxes

      Before tensile strength: ≥13.8MPa

      Aging elongation: ≥100%

      Aging condition (C x H): 100 x 240

      After tensile strength: ≥85%MPa of unaged

      Aging elongation: ≥50% of nagged

      Cold bend (-20 ±2℃ x 4 hours): no crock

      Cable data:

      Conductor: solid bare copper

      AWG: 23

      Conductor diameter: 0.57mm

      Insulation: PE

      Average thickness: 0.22 ±0.03mm

      Min point thickness: 0.18

      Insulation diameter: 1.02 ±0.03mm

      Twisting lay length: 30mm underneath

      Cable lay length: 200mm underneath

      Jacket: PVC

      Average thickness: 0.5mm

      Min point thickness: 0.43mm

      Outer diameter: 6.0 ±1.0mm

      Rip cord: supported

      Weight: 42kg/km


      1.10GBase-T Ethernet, 1000Base-Tx Gigabit Ethernet, 10Base-T, 100Base-T fast Ethernet (IEEE802.3), 100VG any LAN (IEEE802.12), 155/622Mbps ATM, 550MHz broadband video, voice and T1, ISDN

      ALL proposed category 7-requirement as per ANSI/TIA/EIA, IEC and CENELEC EN standards

      Powered by MetInfo 5.3.16 ©2008-2019